two Behringer BCF2000 midi controllers

[beuzz60]

image.jpg

Hello everybody !
I tried several configurations to control my shows in midi, here is a picture of my current setup.
I use the 12" touch screen in editor to build the scenes, And in second screen with the mac during the show.
2 BCF2000 in chain for more knobs ( I would like to add a mini keyboard in USB, but it's not possible yet, i know)
IPad with mobile live mainly for flash button, Strob , special effect.....
So I'm waiting for the app design for iPad with the specifications who many user want in the forum,
And with a Blackout button (like control+shift+Z) near master faders ^_^ ??
Questions are welcome, même en français , pas de soucis

[beuzz60]

image.jpg

The setup of this show:
Hazer
10x PAR56 Led 24x3W STAIRVILLE
6x BarLed 12x3w lightmaxx
2x lyres STAIRVILLE MHX50
2x wash 7x10w lightmaxx
1xstarled 10w lightmaxx
4x PC 1kw + dimmer pack

[Pink LD]

Thanks for the pictures. I should probably do the same so folks can see what I do.

[fedo]

bonjour a tous je viens de recevoir ma bcf
quelqu un peut il me dire les bases de la configuration de la bcf et du logiciel pour faire fonctionner les deux et si possible en francais soyons chauvins un peu
merci a tous
dimitri

[beuzz60]

Bonsoir Fedo,

Voici dans un premier temps la copie du tuto que j'ai posté dans ce sujet: viewtopic.php?f=9&t=2165&start=10

Dès que j'aurai un peu plus de temps je le ferai en français ----

Hi DJ Trenco,

In first, I think you should reset your BCF:
1-Switch ON the BCF
2- Push and Hold ¨store & learn¨ turn off the BCF
3-Switch on again, it will be reset !

In second hand, use your BCF in USB mode U1 (personnaly I'm not using BC mode) :

Setting Device to USB Mode 1 (U-1)

USB mode 1 (U-1) is used for controlling software via USB and disables all the MIDI ports on the actual BCF2000.

1- Push & hold the EDIT button on the BCF2000, and press STORE button at the same time.
2- Release both buttons
3-Select U-1 by turning the “PUSH ENCODER 1” (uppermost left corner knob) until “U-1” is shown in the display area.
4-Push the EXIT button

At least, plug your BCF into your Laptop (usb) ,switch on and testing midi informations with a midi software like "midi trail" (Mac)
So starting sweetlight and choose the BCF in DMX midi Patch

I hope I'm quite understandable, I'm french user

Have fun