Midi device - status ✓ at first and x after restart [fixed]

live control with midi devices

Midi device - status ✓ at first and x after restart [fixed]

Postby djmappouras » 01 August 2021, 14:02

Hello everyone,
I do have an Arturia Minilab mk2, a 25key keyboard midi + 8 buttons and 16 faders.
if it is possible to make only the 8 buttons to work i will be very happy.
My issue is that when i connect the midi, i can find it in the preferences but after apply, restarting the program again i am getting an X on status rather than a ✓.
i did install arturia software, arturia control center which allows you to map your midi and the midi drivers. am i missing a driver or do i have to install another 3rd party app. any tips are welcome!
Thank you
djmappouras
 
Posts: 2
Joined: 01 August 2021, 13:47

Re: Arturia Minilab MIDI to ShowExpress

Postby support » 02 August 2021, 09:56

Please check that aonther application is not using the midi device.
When this happen, the OS does not allow our software to use it, which occurs the "X" sign.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Arturia Minilab MIDI to ShowExpress

Postby Luc Henrion » 02 August 2021, 13:46

In fact, you will probably have to quit the "Control Centre" once you have completed all the tasks there.
Luc Henrion
 
Posts: 262
Joined: 30 March 2015, 06:57

Re: Arturia Minilab MIDI to ShowExpress

Postby djmappouras » 04 August 2021, 06:56

fixed! yes support was right! i had control center open, this is the reason why the midi wasnt working. The midi must be free to get used by showexpress!
djmappouras
 
Posts: 2
Joined: 01 August 2021, 13:47

Re: Arturia Minilab MIDI to ShowExpress

Postby support » 04 August 2021, 08:26

Nice to see it works well now.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Midi

Who is online

Users browsing this forum: No registered users and 8 guests