Fade in timing on DMX Rack

upload scenes in the standalone memory of the interface

Fade in timing on DMX Rack

Postby NicolaTravaglia » 12 January 2019, 16:30

Morning,

before an information: my quick dmx version is old and i don't know the firmware version of the rack.

Problem: i stored my scenes on DMX Rack, but i have 2 problem

1) when i stored a scene on the button there isn't the loop, so after the duration of the cue went off.
to avoid this i copied the same cue, always in zone 1, and so the cue is on until i press an other button.

2) now my real problem is that the cues play with a fade in of 10 seconds, not in snap.

could be the software version, or the firmware, or i wrong something?

thanks a lot for the help.
NicolaTravaglia
 
Posts: 1
Joined: 12 January 2019, 13:49

Re: Fade in timing on DMX Rack

Postby support » 12 January 2019, 19:04

We suggest you to double-check the generated scene in the software.
To do that, please follow this: https://thelightingcontroller.com/viewt ... =74&t=5125
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to StandAlone

Who is online

Users browsing this forum: No registered users and 5 guests