Restrictions from PC to interface

upload scenes in the standalone memory of the interface

Restrictions from PC to interface

Postby support » 23 March 2015, 15:51

"Live" and "StandAlone" use a similar TimeLine, but due to interface standalone engine restrictions, there are things that are not allowed in the StandAlone TimeLine. In StandAlone:
- the tools "off/pause/stop" are not allowed
- each scene is played only one time (not looping)
- the software generates a scene from time 0 up to the end time of the last present scene
- the generated scenes are here: "../YourLightShow/StandAlone/scenes/universeX_buttonY.sce" ; these generated scenes are uploaded in the interface ; you can check them in tab "Steps"
- these scenes will play in loop in standalone

Other point:
Fine channels (16bits pan/tilt/RGB/...) are not managed in StandAlone mode.
The Lighting Controller
support
Administrateur
 
Posts: 7570
Joined: 07 December 2009, 16:32

Return to StandAlone

Who is online

Users browsing this forum: No registered users and 1 guest