Support-
I have an interesting challenge and I'm not sure how to solve it. If the software doesn't already have a solution, this might be feature request.
I have fixtures that have built in strobe patterns but they are very specific ranges in a channel. The built in strobes always look better than creating a strobe in the generator so I'd like to avoid that as a workaround. A specific channel on one of my moving fixtures has strobe speed set from value 50-100. As you adjust the value up, the strobe frequency increases but if you go past 100, you start to get different pulse patterns and effects that are also built into that fixture on that channel.
I would like to be able to assign a fader on the live buttons screen to adjust that particular channel for the range 50-100 so I can adjust the strobe speed in real time during a show. I do not want it going below 50 or above 100 because it will give me undesired results. Setting the fader to "Speed" does not work and if I set it to "Dimmer" I am limited to colors and the dimmer channel.
If a feature request is required, a simple solution to me would be to have a "Custom" fader that allows me to pick the channels and the range inside those channels that the fader affects.
Is there a way to do this already within the software? How would I accomplish this?