request - home Position

create pages with buttons to trigger scenes

request - home Position

Postby muscanto » 28 March 2019, 12:33

The request is to have a screen section inside each fixture when you edit the fixture to default the Pan and Tilt value to a value other then 0 when the program starts up. When no scenes are enabled, the fixture's Pan and Tilt will go to those values as a default. Other programs refer to this feature as a "home position."
muscanto
 
Posts: 107
Joined: 22 June 2015, 13:10

Re: Home Position

Postby support » 29 March 2019, 16:33

Understood.
But not easy to figure out because there are several tabs (Steps, Generator, ...).

Do you have any idea of where to put that function ?
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Re: request - home Position

Postby muscanto » 30 March 2019, 18:27

Editor Tab > Fixtures Tab > Rick click on one or multiple fixtures > "Home Position" option.

The Option would be grayed out if fixture does not at least have a pan and tilt channel configured in it's channel properties. (upan and utilt not required)

A window pops up that includes the pan/tilt grid editor on one side and four faders with fields to enter manual DMX value 0-255 like the steps editor on the other side. (pan, upan, tilt, utilt)

If any of these channels are not enabled for that fixture, they either would either not show or would be grayed out.

Thank you!
muscanto
 
Posts: 107
Joined: 22 June 2015, 13:10

Re: request - home Position

Postby support » 31 March 2019, 15:37

Do you mean that, when the pan/tilt channels are not activated in Steps/Generator/Live, they will be at home position ?
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Re: request - home Position

Postby muscanto » 31 March 2019, 16:22

Yes - Exactly!
muscanto
 
Posts: 107
Joined: 22 June 2015, 13:10

Re: request - home Position

Postby support » 31 March 2019, 16:32

Thank you for your clear explanations.
Added in the ToDo list.
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Re: request - home Position

Postby thorehl » 28 April 2019, 17:09

+1 Well, most of us have this as a step scene, but yes. Saves me space on "Setup Page"
Thore
lydlys.com - Freelance sound & light engeneer
Using HW: D512 on Win10
Controller: 2x Akai APC mini
thorehl
 
Posts: 130
Joined: 20 January 2015, 22:16

Re: request - home Position

Postby support » 29 April 2019, 09:29

A window pops up that includes the pan/tilt grid editor on one side and four faders with fields to enter manual DMX value 0-255 like the steps editor on the other side. (pan, upan, tilt, utilt)

It looks effectively redondant to add a new "home position" setting window, while it can be built easily in tab "Steps", and then simply switched on or off in the tab "Live".
Saves me space on "Setup Page"

If it is not in the setup page, we will need a new button to active it or not.
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Re: request - home Position

Postby Gilles » 29 April 2019, 12:12

Moi j'ai effectivement créé un une scène dans "steps" que j'ai appelé "home", et je l'ai mise dans live avec un démarrage auto, comme cela même si je n'ai aucune scène enclanchée, mes automatiques sont toujours en position.
Gilles
 
Posts: 133
Joined: 21 January 2018, 11:52

Re: request - home Position

Postby muscanto » 30 April 2019, 17:56

Gilles wrote:Moi j'ai effectivement créé un une scène dans "steps" que j'ai appelé "home", et je l'ai mise dans live avec un démarrage auto, comme cela même si je n'ai aucune scène enclanchée, mes automatiques sont toujours en position.


C'est génial. Ce que nous demandons, c’est une fonctionnalité qui évite d’utiliser de l’espace sur votre écran et un bouton dédié à une fonction intégrée à la plupart des autres applications de contrôle de l’éclairage.
muscanto
 
Posts: 107
Joined: 22 June 2015, 13:10

Next

Return to Live - Buttons

Who is online

Users browsing this forum: No registered users and 3 guests