Feature Request - Regarding Master Faders

create pages with buttons to trigger scenes

Feature Request - Regarding Master Faders

Postby ryvanz » 14 May 2018, 00:35

I've noticed the following conditions when using the master fader for any given dimmer:

1. When Master Fader is at 0%, the dimmer on a corresponding fixture acts as normal
2. When Master Fader is at 100%, the dimmer on a corresponding fixture reaches maximum at 50% fader throw
3. When Master Fader is at -100%, the dimmer on a corresponding fixture does nothing, and is effectively zero

Would it be possible, instead of having condition #2, to have the result between the master fader and the fixture dimmer be cumulative, since it's not possible to be brighter than 100%. Ie if master fader is 50% and the fixture dimmer is 50%, then the resulting brightness should be 25% of total brightness. When master fader is at 90% and the fixture dimmer is at 90%, resulting brightness should be 81%. When both are at 100, resulting brightness should be 100.


I hope this made sense. Is it possible to make that change?
ryvanz
 
Posts: 44
Joined: 05 July 2013, 19:10

Re: Feature Request - Regarding Master Faders

Postby support » 14 May 2018, 06:58

Changing that will require a big consultation of different users, because it depends of how you program your scenes.
We could see that only after V9 will be online and stable.
The Lighting Controller
support
Administrateur
 
Posts: 7704
Joined: 07 December 2009, 16:32


Return to Live - Buttons

Who is online

Users browsing this forum: No registered users and 1 guest