thorehl wrote:As with buttons, I like having buttons light up when things are ON.
So i tried on my APC:
Assigned Master fader 2 (In): Control 48 /
Assigned Master fader 2 (Out): Note 64, D2on 1, D2off 0
Tried some more...
Turns out, Master fader 2 (Out) values aren't stored induvidualy.
If I save as above, go back in all is ok but it doesn't work.
Exit program, restart program the values are changed to:
: Control 48, Auto, Auto
rather than
: Note 64, D2on 1, D2off 0
support wrote:We do not see this problem here, with our APC mini.
thorehl wrote:when i assign a Master fader, it only controls the dimmer from -100% to 0%
Well you have my showfile from the other
post (Midnight Special.zip)
You can test.
[Edit]
Tested some more...
-100% = 000 DMX value
-50% = 128 DMX value
0% = 255 DMX value
50% = 255 value
100% = 255 value
this is weird behavor, as only 50% of the fysical fader movment is used