Page 1 of 1

How to Pixel Map WS2812B RGB LED Strips in Showxpress?

PostPosted: 06 September 2019, 11:43
by gymclubdjs
Hi All!

Since Showxpress only supports a maximum of 6 universes, is it possible to pixel map more than 6 x 5m ws2812b rgb led strips totaling 6 x 5m = 30m, 6 x 150 = 900 pixels, 6 x 450 = 2,700 channels of a maximum possible 3,072 channels (6 universes)? That's not a whole lot of realestate when it comes to pixel mapping.

There are numerous third-party artnet controllers made for pixel mapping 8/16 universes of rgb led strips, but they're of little use if Showxpress can only support a maximum of 6 universes.

Is there another way to pixel map a greater number of rgb led strips in Showxpress that I'm unaware of?

Kind Regards,


Gary

Re: How to Pixel Map WS2812B RGB LED Strips in Showxpress?

PostPosted: 07 September 2019, 15:32
by support
Sorry but the max number of universes is 6 (3072 channels).

Re: How to Pixel Map WS2812B RGB LED Strips in Showxpress?

PostPosted: 10 March 2020, 13:32
by thorehl
gymclubdjs wrote:Hi All!

Since Showxpress only supports a maximum of 6 universes, is it possible to pixel map more than 6 x 5m ws2812b rgb led strips totaling 6 x 5m = 30m, 6 x 150 = 900 pixels, 6 x 450 = 2,700 channels of a maximum possible 3,072 channels (6 universes)? That's not a whole lot of realestate when it comes to pixel mapping.

There are numerous third-party artnet controllers made for pixel mapping 8/16 universes of rgb led strips, but they're of little use if Showxpress can only support a maximum of 6 universes.

Is there another way to pixel map a greater number of rgb led strips in Showxpress that I'm unaware of?

Kind Regards,


Gary

A third party application like Jinx! supports Remote Control via midi, and Showxpress supports midi out commands... get where i'm going? :mrgreen: