different fixtures not working well together [fixed]

create scenes with shape generator

different fixtures not working well together [fixed]

Postby jason5d » 01 October 2021, 12:53

Hi

I'm trying to make some generator movement only programs with Chauvet Trio and Chauvet 357z irc movers but the pan/tilt channel doesn't show in channels menu.

Ive tried it with 30ch and 15ch on the Trios - no joy


thx
jason5d
 
Posts: 72
Joined: 07 February 2017, 23:45

Re: different fixtures not working well together

Postby support » 02 October 2021, 17:35

We checked the profiles and we found an error in the IntimidatorSpot375ZIRC(15ch) model.
The fourth channel is "pan fine" instead of "tilt fine".

Please use the attached updated file.
Attachments
IntimidatorSpot375ZIRC(15ch).txt
(2.49 KiB) Downloaded 452 times
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: different fixtures not working well together

Postby jason5d » 04 October 2021, 20:20

thx,
that works with the trio 30ch version, I've noticed the trio 30ch doc has some errors please check the 1st mode channel

here's the Manual:

https://www.chauvetdj.com/wp-content/up ... M_Rev5.pdf

Any chance you can add button in steps menu at the top that can change all fade/step buttons to step
jason5d
 
Posts: 72
Joined: 07 February 2017, 23:45

Re: different fixtures not working well together

Postby support » 05 October 2021, 07:50

I've noticed the trio 30ch doc has some errors please check the 1st mode channel

Noted.

Any chance you can add button in steps menu at the top that can change all fade/step buttons to step

To do that:
Image
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: different fixtures not working well together [fixed]

Postby jason5d » 05 October 2021, 12:00

I mean all the channels. eg when you click said button all the dmx channels across the step menu would change to step and when I click again they would change back to fade

thx
jason5d
 
Posts: 72
Joined: 07 February 2017, 23:45

Re: different fixtures not working well together [fixed]

Postby support » 05 October 2021, 13:26

For that, select all channels (ctrl or shift + mouse click) (red check mark) and press the transition button of any of them.
Image
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Editor - Generator

Who is online

Users browsing this forum: No registered users and 7 guests