Using same channels from different fixtures models

create scenes with shape generator

Using same channels from different fixtures models

Postby kcsoundman » 19 November 2017, 16:38

I have 2 different versions of the Mini Legend Spot ...the original profile and the ILS profile. The profiles have the same channel types but are arranged differently and the channel values differ also. I and am trying to use both in Generator. When I highlight both types of fixture...Generator combines the channel types (pan/tilt, shutter. gobo, etc.) and does not allow individual profile control for each channel. This causes the fixtures to respond differently due to the profile differences per channel. Is there a way to split the profiles in Generator so I can make the fixtures respond identically according to their profiles?
kcsoundman
 
Posts: 10
Joined: 24 January 2016, 18:15

Re: Fixture Mixing in Generator

Postby support » 19 November 2017, 22:08

Sorry but this is not possible.
The channels must have similar levels.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Editor - Generator

Who is online

Users browsing this forum: No registered users and 5 guests