I have 2 Intimidator Spot Duo 150 fixtures. I want to use the pre-made curves in the Generator but I noticed that I can only load the curves in the Generator > curves_pantilt folder for the Pan/Tilt/uPan/uTilt channel and the problem is that channel is only controlling the left head of each of the Intimidator Spot Duo 150s, the other head is not included in that channel.
The other head is only controlled by the individual pan#2, upan#2, tilt#2, and utilt#2 channels, which makes the whole point of having 2 heads worthless. Plus, I can't get the Circle or any of the other cool curves (crown, eight, star, wave) in these individual pan/tilt channels.
My expectation is that both heads on the fixture should be controlled by the Pan/Tilt/uPan/uTilt channel, so that both can have synchronized moves. If I would have known that these duos were not able to move both heads like I expected, I would have bought single heads instead.
Perhaps it's me that's the problem and I don't know how to do it, in which case please let me know what I need to do. But if this is a flaw with the fixtures, please fix it. I'm not able to use the Duos like I hoped and my show is coming up soon.
Thank you.