Page 1 of 1

V8 does not show the dmx channels numbers

PostPosted: 31 October 2016, 12:28
by support
V7 is dmx based
"Steps" knows the dmx address of each fixture, so it is able show the dmx channels numbers.
But if you change the dmx address of a fixture in tab "Fixtures", the scene will not work anymore.

V8 is fixtures based
"Steps" knows only the ID of the fixture, and it does not know its dmx address, so it is not able show the dmx channels numbers.
If you change the dmx address of a fixture in tab "Fixtures", the scene will still work.

You can watch the dmx channels in the window "DMX bargraph".