request - virtual channel "dimmer" for RGB

declare your lighting equipment

Re: request - virtual channel "dimmer" for RGB

Postby support » 29 July 2019, 21:13

So you need to keep the original dmx addressing (1/4/7) ?
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Re: request - virtual channel "dimmer" for RGB

Postby daan44444 » 30 July 2019, 20:33

That is true. The virtual channel isn't hard-wired. This channel controls the level of the rgb channels, that are set in another scene.
daan44444
 
Posts: 6
Joined: 26 July 2019, 00:06

Re: request - virtual channel "dimmer" for RGB

Postby Bob_be » 30 July 2019, 22:31

I think he means it would look like this:

Code: Select all
 R | G  |  B | VD1 |  R |  G |  B | VD2 |  R |  G |  B | VD3 |
C1 | C2 | C3 | VC1 | C4 | C5 | C6 | VC2 | C7 | C8 | C9 | VC3 |


VD# = Virtual dimmer to control 3 previous channels, RGB. In the above example, VD1/VC1 would control Channels 1, 2 & 3, VD2/VC2 would control Channels 4, 5 & 6. etc.
VC# = Virtual Channels, not tided to any fixture channels.
C# = Channels used by fixtures.

Is this what you were thinking of daan44444?
Bob_be
 
Posts: 53
Joined: 11 May 2016, 15:59

Re: request - virtual channel "dimmer" for RGB

Postby support » 01 August 2019, 07:43

Thank you for all these explanations.
We unfortunetely do not see how to add this in the existing software, without rewriting a big part of the source code.
But this will be possible in the next big major software version.
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Re: request - virtual channel "dimmer" for RGB

Postby daan44444 » 03 August 2019, 21:43

Is there already an indication to when the next update will be due?
daan44444
 
Posts: 6
Joined: 26 July 2019, 00:06

Re: request - virtual channel "dimmer" for RGB

Postby daan44444 » 06 August 2019, 05:25

I actually have a different question also. I was wondering if it could be possible to add a fade slider. Certain macros could be selected to work with this fade slider. You could change the time it takes to fade between macros that are selected. It could work just like a speed/master fader.
daan44444
 
Posts: 6
Joined: 26 July 2019, 00:06

Re: request - virtual channel "dimmer" for RGB

Postby support » 06 August 2019, 07:27

We can just say that the next big major software version will not be this year.

Please open a new thread for new requirements.
The Lighting Controller
support
Administrateur
 
Posts: 8322
Joined: 07 December 2009, 16:32

Previous

Return to Editor - Fixtures

Who is online

Users browsing this forum: No registered users and 1 guest