Page 1 of 1

Equinox - RGB Power Batten

PostPosted: 18 January 2019, 08:52
by musicjona
Can anyone help me. i have the profile for the Equinox RGB Battern (26 Channel) and is installed on the computer.
i am trying to create my own Pixel using Show Express.
i have set the DMX address to 73 (starting point of the Equinox) in the pixels tab and have link up the light to the laptop and made sure that the DMX icon in the top right of the screen is on, but nothing happens with the light it stays off.
The Equinox inst listed in the add fixture list so after looking at YT i saw that i could just enter the DMX Address. and pretty much leave everything else on the screen as it is.
i am not sure what i am doing wrong, anyone any ideas. many thanks in advance.

Re: Equinox RGB - Pixel Mapping

PostPosted: 18 January 2019, 09:18
by support
You can post here http://download.thelightingcontroller.c ... for_Pixels, with a link of the manual of this dmx fixture.
And we will to the personality file for you.

Re: Equinox RGB - Pixel Mapping

PostPosted: 18 January 2019, 09:32
by musicjona

Re: Equinox RGB - Pixel Mapping

PostPosted: 22 January 2019, 13:32
by musicjona
Hello support
Sorry to ask but did you have any joy with the pixel mapping.
Many thanks

Re: Equinox RGB - Pixel Mapping

PostPosted: 23 January 2019, 08:17
by support
Sorry we missed you post.

This is done now.
The file is available here: http://download.thelightingcontroller.c ... or_Pixels/

Re: Equinox - RGB Power Batten

PostPosted: 23 January 2019, 11:43
by musicjona
Thank you so much
You guys are so helpful when it comes to support well done to you all
I’m sure I speak for all on this forum
Cheers

Re: Equinox - RGB Power Batten

PostPosted: 23 January 2019, 15:26
by support
Thank you !