Great. PC - XP laptop. I downloaded the files, went to >program files> showexpress> , then went to each of the other files, control panel, live, and pixel and replaced with the files I downloaded. I figure this is the correct way because when I only replaced the files under just the Showexpress folder it gave me an error and I had to reload the software.
Anyways, finally got it working right. Ran the program and the dmx issue issue works. Now the 7 channel light is being treated as a 7 channel light and not a 6 channel.
There is still an issue though. The 1st color channel is still wanting to be red, then green, then blue like the properties screen shows on the dmx setup in pixels.
Effect is a red screen with a yellow line moving to the right via on pixel (led fixture) at a time.
I ran it a couple of ways changing the actual setup of the fixture in the setup page (not in pixel) and it didn't matter where I moved the color channel to on the fixture the pixel program still only adjusted the first channel b/c it thinks that red is always channel one, green - channel two, and blue - channel three.
I know this is right, b/c I moved all three colors around in the main fixture setup screen and noted (on the dmx level screen) that only the first two dmx channels (for the red screen, then green to make to yellow stripe) was only activated, no matter where I put the colors in the fixture itself.
I'm sure I'll be using this program quit frequently to color scroll b/c it will be easier to set it up instead of individually setting each step.
Great job, just a few more adjustments and it'll be good to go.