Chauvet FXPar 9 newbiw question

post here other topics

Chauvet FXPar 9 newbiw question

Postby MisterData » 24 November 2022, 15:14

Hi group
I'm rather new at this. I have 4 Chauvet FXPar 9 ver 1 fixtures. I'm using ShowXpress sw on Windows 11 and a Feenteak cable USB to DMX interface.
When I select 6, 9 or 23 channels on the fixture the address selection starts flashing. If I select an address number and press enter on the fixture nothing changes, still flashing.
When I create something on ShowXpress, the fixture doesnt react.
My first thought is that I'm not specifying a channel on the fixture properly.
Possibly I have a defective cable interface?
I've tried 2 different PCs. One with windows 10 and one with windows 11.
Sorry if I'm posting in the wrong place.
Thanx in advance....
--Carl
Caution:
These posts may contain traces of nut
MisterData
 
Posts: 4
Joined: 22 November 2022, 06:19
Location: Southeast Wisconsin

Re: Chauvet FXPar 9 newbiw question

Postby MisterData » 27 November 2022, 16:29

......am i the only one that ever had this issue?
Caution:
These posts may contain traces of nut
MisterData
 
Posts: 4
Joined: 22 November 2022, 06:19
Location: Southeast Wisconsin

Re: Chauvet FXPar 9 newbiw question

Postby JimbooDMX » 29 November 2022, 00:57

Pretty sure that showxpress only works with Xpress boxes and not a ramdom usb dongle xd
JimbooDMX
 
Posts: 4
Joined: 21 October 2022, 16:52

Re: Chauvet FXPar 9 newbiw question

Postby JimbooDMX » 29 November 2022, 00:59

JimbooDMX wrote:Pretty sure that showxpress only works with Xpress boxes and not a ramdom usb dongle xd
https://thelightingcontroller.com/viewt ... t=5#p26389 scroll to the bottom.
JimbooDMX
 
Posts: 4
Joined: 21 October 2022, 16:52

Re: Chauvet FXPar 9 newbiw question

Postby support » 29 November 2022, 08:43

Correct.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Chauvet FXPar 9 newbiw question

Postby MisterData » 30 November 2022, 01:08

Okay, thanx, that's good to know. Can I assume that the blinking address # on the fixture would stop when I made a selection and was using a proper interface?
Is there an economical version of of one of these interfaces?
Would this be compatible?
https://www.amazon.com/dp/B00O9RY664/re ... 67fc737124
Caution:
These posts may contain traces of nut
MisterData
 
Posts: 4
Joined: 22 November 2022, 06:19
Location: Southeast Wisconsin

Re: Chauvet FXPar 9 newbiw question

Postby support » 30 November 2022, 08:55

economic = hardware only (no software, no technical support, no free DMX fixture libraries, ...)

Our DMX interfaces are here: https://thelightingcontroller.com/viewt ... t=5#p26389
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Chauvet FXPar 9 newbiw question

Postby MisterData » 02 December 2022, 20:23

Ok, it appears that the only way I can connect these fixtures to my pc is with a $300-$400 interface module. :(
Caution:
These posts may contain traces of nut
MisterData
 
Posts: 4
Joined: 22 November 2022, 06:19
Location: Southeast Wisconsin


Return to Other

Who is online

Users browsing this forum: No registered users and 10 guests

cron