by support » 26 January 2010, 09:20
Once the scenes have been uploaded into Remote and when ControlBoard is closed (standalone mode), if you press button#1 of the remote controller, you will run scene#1 ; if you press button#2, you will run scene#2 ; ...
There could be only one running scene into a specific zone:
- if you press button#1 to start scene#1 zone#1, scene#1 is running
- then, if you press button#2 to start scene#2 zone#1, scene#1 is switched off and scene#2 is running
It is like a "solo button" page in Live application.
When "Start" option is checked, the scene automatically starts when the interface is switched on.
The Lighting Controller