found by V5 and not found by V6, under same computer [fixed]

usb to dmx (2003 - 2010)

found by V5 and not found by V6, under same computer [fixed]

Postby RoyalJenner » 06 September 2010, 22:44

Hello

Is there a specific sequence of operations I am required to perform with the X-Factor & 6.x?

It appears to be hit or miss whether or not the box remains in stand alone or not. (note: I am activating the dmx output button in the software)

Thanks
RoyalJenner
 
Posts: 19
Joined: 06 September 2010, 22:38

Re: X-Factor Box & 6.xx

Postby support » 07 September 2010, 07:53

If ControlBoard does not find the interface, you might have to upgrade its driver (current driver version is 1.04).
viewtopic.php?f=3&t=114
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: X-Factor Box & 6.xx

Postby pogjack » 18 October 2010, 00:41

I am having the same issue with 6.25. The software will not send any signals to the DMX Chauvet Box. I have V 5 on the same system as V 6 and V 5 works except I think that having both versions on this computer freezes it up up and makes the lights go off.
I downloaded the driver 1.04 for the 32-bit box and attempted to install it, but it wants the disk for "The file 'EFKusb.sys' on (unknown) is needed. Am I doing something wrong or is there another file I need.

Thanks for your help.
pogjack
 
Posts: 198
Joined: 16 October 2010, 22:56
Location: BILOXI, MS

Re: X-Factor Box & 6.xx

Postby support » 18 October 2010, 07:40

During driver upgrade process, you can manually specify the path where to find this file.
It is located in same folder than the INF file (..\Drivers(Digitally Signed)\D512-BOX-REMOTE-SSA_for_32bits_OS\)
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32


Return to Box

Who is online

Users browsing this forum: No registered users and 3 guests