Correcting light positioning
Posted: 26 October 2022, 23:27
3D View does not show correct light positions for given value compared to real world.
Example
Chauvet Q-SPot 260s Hanging.
Real World / 3D View
0 = Forward Up. (Light Start)
20 - straight ahead / 44
115 - straight down / 129
210 - straight back / 214
As you see, in 3D view these are all off by a value of 85.
Anyway to correct this?
Note I have checked Fixture - Edit Fixture- 3D View 540 x 270 Pan/Tilt.
Example
Chauvet Q-SPot 260s Hanging.
Real World / 3D View
0 = Forward Up. (Light Start)
20 - straight ahead / 44
115 - straight down / 129
210 - straight back / 214
As you see, in 3D view these are all off by a value of 85.
Anyway to correct this?
Note I have checked Fixture - Edit Fixture- 3D View 540 x 270 Pan/Tilt.