Page 1 of 1

Channel 512 of the highest universe is not managed [fixed]

PostPosted: 05 March 2019, 13:52
by Pink LD
Support,
I am using SX V9.1.13 on a Win 10 Pro PC with all the latest updates.

SO I was working with just 3 of the 5 universes I use for my show, i.e. I used the Preferences to have only 3 DMX universes. And I noticed that a Leko fixture I had in U3 on ch512 was not showing in 3D. I checked the DMX Bar Graph and it showed U# ch512 putting out signal. So out of curiosity I swapped several different Lekos and Pars into U3 ch512, same result no 3D presentation, but the DMX Bar Graph shows I am sending signal out from U3 ch512.

I decided to try out another approach and went to a 4 Universe Preference setting, restarted SX, and U3 ch512 was now presenting a beam in 3D. So I swapped the Leko to U4 ch512, saved it, and tried using the fixture, and no beam was presented in 3D.

So I moved the fixture to U2, ch512 and changed the Preferences to 2 Universes, and restarted SX. Same problem.

It would seem that any fixture in Ch512 of the highest universe you are using in SX will not present in 3D.

For now I am just not putting any fixtures into ch512 on the highest universe I have open.

Re: Fixture Features Wont Display in 3D

PostPosted: 13 March 2019, 22:01
by support
It would seem that any fixture in Ch512 of the highest universe you are using in SX will not present in 3D.

Yes you are right.
Added in our ToDo list.

Re: Channel 512 of the highest universe is not managed [fixe

PostPosted: 21 March 2019, 18:19
by support
Fixed in the fix file (with 3DView V5.1.2).