Page 1 of 1

Can you use a external 3d view?

PostPosted: 28 May 2018, 17:52
by Mashout
HI all,

Can we use a external 3d vieuw like Capture via Artnet?

Greetings,
David

Re: Can you use a external 3d view?

PostPosted: 28 May 2018, 21:01
by support
Our software is able to output the dmx channels via Artnet.
Beyond that, we do not know.

Re: Can you use a external 3d view?

PostPosted: 30 May 2018, 10:25
by BartKrap
Mashout wrote:HI all,

Can we use a external 3d vieuw like Capture via Artnet?

Greetings,
David


Yes you can via artnet in on Capture. Just note that you do need to at least one interface connected to be able to output artnet.

Re: Can you use a external 3d view?

PostPosted: 28 September 2018, 22:51
by Shakes
BartKrap wrote:Yes you can via artnet in on Capture. Just note that you do need to at least one interface connected to be able to output artnet.


When you say one interface, is that an Artnet interface or a lighting controller DMX interface??

Re: Can you use a external 3d view?

PostPosted: 29 September 2018, 04:50
by SeekLighting
You always need a Lighting Controller interface to unlock output. One Interface connected provides 2 universes - one over the interface via DMX and another via artnet, output from the Computer's Ethernet port. You would need to purchase an artnet node to convert this artnet signal back to DMX.