Can you use a external 3d view?

graphic representation in 3 dimensions

Can you use a external 3d view?

Postby Mashout » 28 May 2018, 17:52

HI all,

Can we use a external 3d vieuw like Capture via Artnet?

Greetings,
David
Mashout
 
Posts: 2
Joined: 03 December 2017, 16:43

Re: Can you use a external 3d view?

Postby support » 28 May 2018, 21:01

Our software is able to output the dmx channels via Artnet.
Beyond that, we do not know.
The Lighting Controller
support
Administrateur
 
Posts: 10538
Joined: 07 December 2009, 16:32

Re: Can you use a external 3d view?

Postby BartKrap » 30 May 2018, 10:25

Mashout wrote:HI all,

Can we use a external 3d vieuw like Capture via Artnet?

Greetings,
David


Yes you can via artnet in on Capture. Just note that you do need to at least one interface connected to be able to output artnet.
Head of lighting, lighting designer and lighting operater at De Zoom and Pinky's in Renesse and Ron van der Veen Entertainment.
BartKrap
 
Posts: 215
Joined: 06 June 2016, 18:37
Location: Netherlands

Re: Can you use a external 3d view?

Postby Shakes » 28 September 2018, 22:51

BartKrap wrote:Yes you can via artnet in on Capture. Just note that you do need to at least one interface connected to be able to output artnet.


When you say one interface, is that an Artnet interface or a lighting controller DMX interface??
Shakes
 
Posts: 54
Joined: 29 March 2012, 19:02
Location: Midlands - UK

Re: Can you use a external 3d view?

Postby SeekLighting » 29 September 2018, 04:50

You always need a Lighting Controller interface to unlock output. One Interface connected provides 2 universes - one over the interface via DMX and another via artnet, output from the Computer's Ethernet port. You would need to purchase an artnet node to convert this artnet signal back to DMX.
SeekLighting
 
Posts: 364
Joined: 03 April 2017, 02:28


Return to 3DView

Who is online

Users browsing this forum: No registered users and 3 guests

cron