[Request] Display Multiple Gobo wheels, Prism, frost, etc.

graphic representation in 3 dimensions

[Request] Display Multiple Gobo wheels, Prism, frost, etc.

Postby TimH » 26 February 2018, 01:15

Hi Support,

I know that an upgrade to 3D View is currently on the cards for Version 9. I (and many other users I have talked to), would like to see the following upgrades in Version 9:

1) All Gobos display correctly in 3D View for all fixtures (and an updated gobo list for that matter)
2) Prism effects display correctly in 3D View, including 3 Facet, 8 Facet, 5 facet linear, 16 facet, etc. This includes the ability to customise the fixture to show how wide the prism shoots the beam, as well as support for a fixture that has multiple prism types
3) Multiple Gobo Wheels display at the same time, and you can use the focus channel to accurately focus between them, rather than the current system which just displays two gobos on top of eachother
4) Multiple colour wheels in a moving head a) work properly in Steps mode and b) display and colour mix correctly in 3D View
5) Frost channel on a moving head works correctly and changes the beam type from a spot to a wash
6) Colour Macro channel on a moving head works correctly in 3D View. Currently setting the colour macro channel to a particular value does nothing. It would be great if the beam colour would change accordingly in 3D View.
7) Pixels displays correctly in 3D View. This means added support for fixtures that shoot multiple beams.
8) Lasers display correctly in 3D View
9) Support for mirror balls in 3D View that accurately work as mirror balls
10) Effect lighting fixtures that display and work correctly in 3D View. Some examples: https://djcity.com.au/product/chauvet-d ... -dj-light/ https://djcity.com.au/product/chauvet-d ... projector/ https://djcity.com.au/product/beamz-mag ... elly-ball/ https://djcity.com.au/product/ave-orbe-led-mirror-ball/ https://djcity.com.au/product/chauvet-d ... ect-light/ http://www.martin.com/en-us/product-det ... -dc-1-aqua
10) Fixture profiles and accurately represented fixture models for conventional lighting fixtures (ie. Profiles, Fresnels, Ray Cans, Par56, Par64, Par36, Pinspots, etc.)
Posts: 125
Joined: 03 April 2017, 02:28

Re: [Request] Display Multiple Gobo wheels, Prism, frost, et

Postby support » 26 February 2018, 10:49

The Lighting Controller
Posts: 7120
Joined: 07 December 2009, 16:32

Return to 3DView

Who is online

Users browsing this forum: No registered users and 1 guest