Movinghead slow in playback

[MickeyMick]

Movinghead is slow in playback but not slow when ik manually click the steps.
I want to create a scene with the heads shooting a beam and then move (blackout) to another position and then shoot again
My head is a showtec led 50.

[support]

For the fastest movement, the transition mode (button below the vertical fader) must be set to "snap" mode.

For "blackout move", you can set channel 12 to "blackout during Pan/Tilt movement" (dmx level 18).

[MickeyMick]

Is there a trick to setup up the head (in positon) before the shutter opens?
I know you can do it with programming but is there something so the head knows where his posiotin is gotta be?
i want to shoot beams one by one.
head 1
head 2
head 1
head 2

etc.

[MickeyMick]

Are there coming new curves for the generator in the future?

[MickeyMick]

Tried it today, but still slow!.

[support]

In the software, we just propose a few samples of curves.
However, it is open. You can create/open/save any curve you want, in any lightshow.

[MickeyMick]

In the software, we just propose a few samples of curves.
However, it is open. You can create/open/save any curve you want, in any lightshow.

Good answer, but not the answer i wanted to hear.
Are you guys making new curves or a share your curve topic

Another problem. When i put my heads in 180 degree mode. I cant use the generator, i have to turn my heads 90 degrees. Is there a solution for this?